A/C Compressor Removal and Installation

REMOVAL
The A/C compressor may be removed and repositioned without discharging the refrigerant system. Discharging is not necessary if removing the A/C compressor clutch/coil assembly, engine, cylinder head or generator.

WARNING: Refrigerant pressures remain high even though the engine may be turned OFF. Before removing a fully charged compressor, review the Safety Precautions And Warnings Section. Do not twist or kink the refrigerant lines when removing a fully charged compressor. Safety glasses must be worn.

1. Disconnect the negative cable from the battery.
2. Loosen and remove the serpentine belt.
Cooling System
3. Disconnect compressor clutch wire lead.
4. If the compressor must be removed from the vehicle, discharge the A/C system into a recovery/recycle device. Remove refrigerant lines from compressor.
Refrigerant
5. Remove compressor attaching bolts.
6. Remove compressor. If refrigerant lines were not removed, lift compressor/clutch assembly and tie it to a suitable component.