Fluid Pump, A/T

DRIVE GEAR:

Tip Clearance:
Standard 0.11 - 0.14 mm (0.0043 - 0.0055 inch)
Maximum Allowance 0.3 mm (0.012 inch)

Gear To Pump Body End Clearance:
Standard 0.02 - 0.05 mm (0.0008 - 0.0020 inch)
Maximum Allowance 0.1 mm (0.004 inch)

DRIVEN GEAR-TO-PUMP:

Body Clearance:
Standard 0.07 - 0.15 mm (0.0028 - 0.0059 inch)
Maximum Allowance 0.3 mm (0.012 inch)

TIGHTENING:
To Case Bolt 21 - 23 Nm (16 - 18 ft. lbs.)
To Stator Shaft Bolt 9 - 11 Nm (80 - 96 inch lbs.)