With Odometer

USING THE VEHICLE ODOMETER

1. Cycle the ignition key On - Off - On - Off - On within 5 seconds.

2. After a short pause, the mileage shown on the vehicles digital odometer will be temporarily deleted. After this occurs, read the DTC number displayed on the odometer. Each two-digit number will be displayed with a slight delay between numbers.

3. A DTC number 55 will always be the last code to be displayed. This indicates the end of all stored codes. After code 55 has been displayed, the odometer will return to its normal mode.

4. To erase DTC's, use the Erase Trouble Code data screen on the DRB scan tool.