Glove Box Lamp: Service and Repair

REMOVAL

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

1. Disconnect and isolate the battery negative cable.
2. Remove the passenger side airbag module. Refer to AIR BAGS AND SEAT BELTS/Air Bags for the procedures.

Glove Box Latch Striker Remove/Install:

3. Remove the two screws that secure the glove box latch striker to the instrument panel on the top of the upper glove box opening reinforcement.
4. Remove the latch striker from the glove box opening.
5. Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).