Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Fuel Injector: Testing and Inspection
FUEL INJECTOR TESTFig. 11 Fuel Injector Internal Components - Typical:
To perform a complete test of the fuel injectors and their circuitry, refer to DRB scan tool and appropriate Powertrain Diagnostic Procedure. To test the injector only, refer to the following:
Disconnect the fuel injector wire harness connector from the injector. Place an ohmmeter across the injector electrical terminals. Resistance reading should be approximately 12 ohms +/- 1.2 ohms at 20°C (68°F).