Trouble Codes

BUS FAILURE MESSAGES
Short to Battery - Either or both of the bus wires are shorted to the battery potential.

Short to 5 Volts - Either or both of the bus wires are shorted to a 5-volt potential.

Short to Ground - Either or both of the bus wires are shorted to ground.

Bus (+) & Bus (-) Shorted Together - The two bus wires are shorted together.

No Termination - The bus system has lost connection with all of its terminators.

Bus Bias Level Too Low - Either or both of the bus wire potentials are significantly below their normal 2.5 volts.

Bus Bias Level Too High - Either or both of the bus wire potentials are significantly above their normal 2.5 volts.

No Bus Bias - The bus system has lost connection with all modules that provide bias. Bus (+) Open - The bus (+) wire has lost connection with termination and/or bias.

Bus (-) Open - The bus (-) wire has lost connection with termination and/or bias.

Not Receiving Bus Messages Correctly - The DRB cannot communicate over the bus and does not know why.