Condenser HVAC: Specifications

Tighten the two screws that secure the upper condenser mounting brackets to the top of the grille panel screws to 2.2 Nm (20 in. lbs.).

Tighten the six screws that secure the radiator and shroud unit to the grille panel screws to 8 Nm (72 in. lbs.).

Tighten the inlet and outlet jumper tube block fittings to the condenser with mounting screws to 12 Nm (105 in. lbs.).

Tighten the two screws that secure the lower condenser bracket to the bottom of the grille panel to 2.2 Nm (20 in. lbs.).