Computers and Control Systems: Tools and Equipment

REQUIRED TOOLS AND EQUIPMENT
DRB III (diagnostic read-out box) scan tool
Evaporative System Diagnostic Kit # 6917
fuel filler adapter # 8382
fuel pressure adapter (C-6631) or # 6539
fuel pressure kit (C-4799-B) or # 5069
fuel release hose (C-4799-1)
Min Air flow fitting # 6714
jumper wires
ohmmeter
oscilloscope
vacuum gauge voltmeter
12 volt test light minimum 25 ohms resistance with probe # 6801

CAUTION: A 12 VOLT TEST LIGHT SHOULD NOT BE USED FOR THE FOLLOWING CIRCUITS, DAMAGE TO THE POWERTRAIN CONTROLLER WILL OCCUR.

- 5 Volt Supply
- 8 Volt Supply
- J1850 PCI Bus
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal