Seat Track: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig.3 Power Seat Remove/Install:

2. Remove the inoperative seat from the vehicle.
3. Remove the power seat switch from the outboard side of the inoperative seat cushion.
4. Disengage the power seat wire harness and the power seat switch connector from the seat cushion frame.
5. Remove the power seat track from the seat cushion frame.

INSTALLATION
1. Reinstall the power seat track onto the seat cushion frame.
2. Engage the power seat wire harness and power seat switch connector to the seat cushion frame.
3. Reinstall the power seat switch to the outboard side of the seat cushion.
4. Reinstall the seat and the power seat track unit into the vehicle as a unit.
5. Reconnect the battery negative cable.