Fog/Driving Lamp Bulb: Service and Repair

Fig.8 Fog Lamp Components:

REMOVAL
1. Remove the screws that secure the access cover to the bottom of the fog lamp housing.
2. Remove the spring clip that secures the bulb within the fog lamp housing.
3. Disconnect the bulb from the bulb holder.
4. Remove the bulb from the fog lamp.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or let the bulb contact other oily surfaces. Reduced bulb life will result.

1. Position the bulb element in the fog lamp.
2. Connect the bulb holder to the bulb.
3. Install the spring clip that secures the bulb within the fog lamp housing.
4. Install the screws that secure the access cover to the bottom of the fog lamp housing.