Vanity Lamp: Service and Repair

REMOVAL
Bulb
1. Using a small flat blade, carefully pry each corner of lens outward from lamp.
2. Separate lens from lamp.
3. Grasp bulb and pull outward.

Lamp
1. Fold down sunvisor.
2. Starting at the base of the lamp assembly and working right-to-left, use a small flat blade, carefully pry lamp from visor.
3. Disconnect visor lamp wire connector and remove from vehicle.

INSTALLATION
Bulb
1. Position bulb in socket and push into place.
2. Position lens on lamp and snap into place.

Lamp
1. Position visor lamp at visor and connect visor lamp wire connector.
2. Position visor lamp in visor and press into place.