IOD Fuse Replacement

Fig.2 Ignition-Off Draw Fuse:

REMOVAL
The Ignition-Off Draw (IOD) fuse is removed from Power Distribution Center (PDC) fuse cavity 15 (Fig. 2) when the vehicle is shipped from the assembly plant. Dealer personnel must install the IOD fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation.

1. Turn the ignition switch to the OFF position.
2. Unlatch and open the cover of the PDC.
3. Remove the IOD fuse from fuse cavity 15 of the PDC.
4. Store the removed IOD fuse by installing it in the unused fuse storage cavity 11 of the PDC.
5. Close and latch the PDC cover.

INSTALLATION
1. Turn the ignition switch to the OFF position.
2. Unlatch and open the cover of the PDC.
3. Remove the stored IOD fuse from fuse storage cavity 11 of the PDC.
4. Use a thumb to press the IOD fuse firmly down into PDC fuse cavity 15.
5. Close and latch the PDC cover.