Door Module: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the front door.

Fig.7 Door Module:

3. Remove the five screws that secure the door module to the back of the front door trim panel.
4. Remove the door module from the front door trim panel.

INSTALLATION
1. Position the door module onto the front door trim panel.

Fig.7 Door Module:

2. Install and tighten the five screws that secure the door module to the back of the front door trim panel. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Reinstall the trim panel onto the front door.
4. Reconnect the battery negative cable.