Rear Header Trim
REAR HEADER TRIMREMOVAL
1. Disconnect the rear window defogger electrical connectors, if equipped.
Fig. 14:
2. Remove the wiper motor cover and disconnect the wiper motor electrical connector and washer hose. (Fig. 14)
Fig. 15:
3. Using a trim stick C-4755 or equivalent, separate the header trim and retainer clips from the top. (Fig. 15)
4. Pull the wire harnesses and washer hose through the trim panel and remove.
INSTALLATION
1. Route the wire harnesses and washer hose through the trim panel.
2. Install the header trim and seat the retaining clips fully.
3. Connect the wiper motor electrical and the washer hose connection.
4. Connect the rear window defogger electrical connectors, if equipped.