Power Interrupt Connector/Switch: Service and Repair

Fig.3 Ignition-Off Draw Fuse:

REMOVAL
The Ignition-Off Draw (IOD) fuse is removed from Power Distribution Center (PDC) fuse cavity 25 (Fig. 3) when the vehicle is shipped from the assembly plant. Dealer personnel must install the IOD fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation.
1. Turn the ignition switch to the OFF position.
2. Unlatch and open the cover from the PDC.
3. Remove the IOD fuse from fuse cavity 25 of the PDC.
4. Store the removed IOD fuse by inserting the terminal blades of the fuse into the empty fuse cavity 27 of the PDC.
5. Close and latch the cover onto the PDC.

INSTALLATION
The Ignition-Off Draw (IOD) fuse is removed from Power Distribution Center (PDC) fuse cavity 25 (Fig. 3) when the vehicle is shipped from the assembly plant. Dealer personnel must install the IOD fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation.
1. Turn the ignition switch to the OFF position.
2. Unlatch and open the cover from the PDC.
3. Remove the stored IOD fuse from fuse cavity 27 of the PDC.
4. Align the terminal blades of the IOD fuse with the terminal receptacles in fuse cavity 25 of the PDC.
5. Use a thumb to press the IOD fuse firmly down into PDC fuse cavity 25.
6. Close and latch the cover onto the PDC.