Front Wiper Module Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front wiper arms from the wiper pivots. (Refer to ELECTRICAL/FRONT WIPERS/WASHERS/FRONT WIPER ARMS - REMOVAL).
3. Remove the cowl plenum cover/grille panel from the cowl top panel.

Fig.16 Front Wiper Module Remove/Install:

4. Reach into the cowl plenum to access and disconnect the cross body wire harness connector for the front wiper motor from the front wiper motor pigtail wire connector.
5. Remove the three screws that secure the front wiper module mounting bracket to the cowl plenum panel.
6. Remove the front wiper module from the cowl plenum as a unit.

INSTALLATION
1. Position the front wiper module into the cowl plenum as a unit.
2. Install and tighten the three screws that secure the front wiper module mounting bracket to the cowl plenum panel. Tighten the screws to 6 Nm (50 in. lbs.).
3. Reach into the cowl plenum to access and reconnect the cross body wire harness connector for the front wiper motor to the front wiper motor pigtail wire connector.
4. Reinstall the cowl plenum cover/grille panel onto the cowl top panel.
5. Reinstall the front wiper arms onto the wiper pivots. (Refer to ELECTRICAL/FRONT WIPERS/WASHERS/FRONT WIPER ARMS - INSTALLATION).
6. Reconnect the battery negative cable.