Ignition Coil Capacitor Replacement

Fig.21 Coil Capacitor (Left Side Shown):

REMOVAL
Two coil capacitors are used. One of them is located near the center of, and on the left side of the intake manifold. The other capacitor is located near the center of, and on the right side of the intake manifold.

1. Disconnect electrical connector at coil capacitor.
2. Remove mounting nut.
3. Remove capacitor from mounting stud.

INSTALLATION
1. Position capacitor to manifold mounting stud.
2. Install nut and tighten to 8 Nm (70 in. lbs.) torque
3. Connect electrical connector to capacitor.