Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2002 >> Wrangler L4-2.5L VIN P >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Description and Operation >> Electro/Mechanical Instrument Cluster (EMIC) >> Vehicle Status Messages Displayed In the VF Display
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Status Messages Displayed In the VF Display

VEHICLE STATUS MESSAGES DISPLAYED IN THE VF DISPLAY
During normal operation, if a condition is present, the cluster will inform the driver by displaying one of the following messages in the VF display. These messages will alternate (1 second ON / 1 second OFF) with the odometer if the vehicle speed is 0 (zero). If multiple conditions exist, the cluster will cycle through all messages including the odometer/trip odometer.

When the vehicle speed is greater than 0 (zero), only the odometer will be displayed. The VF will only display faults while the condition exists. Messages with more than 6 characters will be scrolled.

The displaying of P-codes will take priority over any Vehicle Status Messages and odometer/trip odometer information in the VF display.

"NO FUSE" In VF Display
* The M1 fuse is not detected by the cluster.

"NO BUS" In VF Display
While a loss of communication condition exists for all the following conditions:
* Airbag
* PCM
* SKIM

pro multis · About Operation CHARM