Front

Front Washer Nozzle Replacement
REMOVAL
1. Open and support the hood.

Fig.6 Front Washer Nozzles Remove/Installation:

2. From under the rear of the hood, disconnect the washer supply hose from the barbed nipple of the front washer nozzle.
3. From under the rear of the hood, gently squeeze the snap features of the front washer nozzle and push the nozzle out through the mounting hole towards the outside of the hood panel.
4. Remove the front washer nozzle from the top of the hood panel.

INSTALLATION
1. Position the front washer nozzle into the mounting hole from the top of the hood panel. Be certain the two nozzle orifices are oriented towards the windshield.
2. Using hand pressure, press the front washer nozzle firmly and evenly into the mounting hole from the top of the hood panel until the snap features of the nozzle are fully engaged.
3. Open and support the hood.
4. From under the rear of the hood, reconnect the washer supply hose to the barbed nipple of the front washer nozzle.
5. Close and latch the hood.
6. Operate the front washer system and inspect the front washer nozzle spray pattern Adjust the nozzle orifices as required (Refer to FRONT WIPERS/WASHERS/FRONT WASHER NOZZLE - DESCRIPTION).