Quarter Window Glass: Service and Repair

QUARTER WINDOW

REMOVAL

1. Remove the headliner as necessary to gain access to the glass seal from the inside.
2. Cut urethane bonding from around quarter window glass using a suitable sharp cold knife. A pneumatic cutting device can be used if available.
3. Separate glass from vehicle.

INSTALLATION

CAUTION: Open a window before installing glass. This will avoid pressurizing the passenger compartment. If a door or swing gate flip-up glass is slammed before urethane is cured, water leaks can result.

The window opening fence should be cleaned of old urethane bonding material.
1. Install the headliner as necessary.
2. Clean inside of glass with Mopar(R) Glass Cleaner and lint-free cloth.
3. Apply PVC (vinyl) primer 25 mm (1 in.) wide around edge of glass. Wipe with clean/dry lint-free cloth.
4. Apply fence primer around edge of fence. Allow at least eighteen minutes drying time.
5. Apply a 10 mm (0.4 in.) bead of urethane around window vinyl border location.
6. Position glass into window opening and lock clips into place.