Disassembly

45RFE - AUTOMATIC TRANSMISSION
4C RETAINER-BULKHEAD / DISASSEMBLY






1. Remove the 2C piston belleville spring snap ring from the 4C retainer /bulkhead (Fig. 66).
2. Remove the 2C piston Belleville spring from the retainer/bulkhead (Fig. 66).
3. Remove the 2C piston from the retainer/bulkhead. Use 20 psi of air pressure to remove the piston if necessary.
4. Remove the 4C clutch snap-ring from the retainer/bulkhead (Fig. 66).
5. Remove the 4C clutch pack from the retainer/ bulkhead (Fig. 66).
6. Using Spring Compressor 8250 and a suitable shop press, compress the 4C piston return spring and remove the snap-ring (Fig. 66).
7. Remove the 4C piston return spring and piston from the retainer/bulkhead (Fig. 66). Use 20 psi of air pressure to remove the piston if necessary.