Front Bumper: Service and Repair

FRONT BUMPER

REMOVAL

1. If equipped, disconnect the fog lamp harness connector.

Fig. 2:

2. Remove the screws that attach the bumper to the frame rail (Fig. 2).
3. If equipped, remove the tow hook.
4. Separate the bumper from the vehicle.

INSTALLATION

1. Position the bumper on the vehicle.
2. If equipped, install the tow hook.
3. Install the screws that attach the bumper to the frame rail and tighten to 108 N.m (80 ft.lbs.).
4. If equipped, Connect the fog lamp harness connector.