Center Console

CENTER CONSOLE

REMOVAL

1. Remove the cup holder, if equipped.

Fig. 10:

2. On full console models remove the trim disc from the bottom of the cup holder (Fig. 10).
3. Remove the automatic transmission shift bezel, if equipped.
4. Using a trim stick C-4755 or equivalent, remove the air bag deactivation switch and disconnect the electrical connector, if equipped.

Fig. 8:

Fig. 9:

5. Remove the bolt(s) attaching the console to the floor pan (Fig. 8) and (Fig. 9).
6. Shift transfer case to four low position.
7. Shift transmission to L (2nd gear for manual transmission) and remove the console assembly.

INSTALLATION

1. Connect the electrical connector and install console tower assembly over the park brake lever, if equipped.
2. Install the tower bolts.
3. Install the mini console assembly over the transmission and transfer case shifters.
4. Install the console bolts.
5. Connect the air bag deactivation switch electrical connector and install the switch, if equipped.
6. Connect the air bag deactivation switch electrical connector and install the switch, if equipped.
7. Install the auto transmission shift bezel, if equipped.
8. Install the manual transmission shift boot, if equipped.
9. Install the cup holder and trim disc, if equipped.