Front Seat Back

FRONT SEAT BACK

REMOVAL

1. Remove seat.
2. Disengage the j-straps at the lower edge of the seat back and position the seat back cover aside.

Fig. 3:

3. Using a small flat bladed tool, release the hinge cover retaining tab and remove. (Fig. 3)

Fig. 4:

4. Disconnect the recliner cables. (Fig. 4)
5. Remove the upper recliner bolts and remove the seat back

INSTALLATION

1. Position the seatback on the seat cushion.
2. Passenger seat and driver dumping seat:
a. Engage seat dump cable to clip on recliner.

3. Install the bolts attaching the recliner to the seat cushion frame.
4. Engage the seat cushion corner cover j-retainers.
5. Engage the retainers attaching the cushion cover to the outboard seat cushion frame.
6. Install seat.