Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2003 >> Wrangler L4-2.4L VIN P >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Acceleration/Deceleration Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Acceleration/Deceleration Sensor: Service and Repair

G-SWITCH

REMOVAL
1. From the drivers side lift carpet back in front of the console/shifter.
2. Disconnect harness for switch.





3. Remove mounting bolts and remove switch.

INSTALLATION





CAUTION: The mercury switch (inside the G-switch), will not function properly if the switch is installed incorrectly. Verify that the switch locating arrow is pointing to the front of the vehicle.

1. Position switch on mounting bracket.
2. Install mounting bolts and tighten to 4 - 5 Nm (35 - 45 in. lbs.)
3. Connect harness to switch.
4. Place carpet back into position.
pro multis · About Operation CHARM