Tail Lamp: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig. 34 Lens Removal:

2. Remove the screws attaching the lens to the tail lamp housing.
3. Separate the lens from the tail lamp housing.
4. Push the bulb inward and rotate counter-clockwise.
5. Remove the bulb from the lamp socket.

INSTALLATION
1. Install a replacement bulb in the lamp socket by pushing inward and rotating the bulb clockwise.
2. Position the lens on the lamp housing.
3. Install and tighten the screws.
4. Connect the battery negative cable.