Front

REMOVAL
1. Unlatch, open and support the hood.

Fig. 9 Front Washer Nozzle Remove/Install:

2. From the underside of the rear of the hood panel near the center, disconnect the washer supply hose from the barbed nipple of the front washer nozzle.
3. From the underside of the rear of the hood panel near the center, gently squeeze the latch feature of the front washer nozzle and push the nozzle out through the mounting hole towards the outside of the hood panel.
4. Remove the front washer nozzle from the top of the hood panel.

INSTALLATION
1. Lower the hood panel.
2. From the top of the hood panel, position the nipple end of the front washer nozzle through the mounting hole. Be certain the nozzle orifice is oriented towards the windshield, then engage the notched forward-facing end of the nozzle housing to the forward edge of the mounting hole.
3. Using hand pressure, press firmly and evenly on the top of the front washer nozzle until the integral latch feature locks into place on the underside of the hood panel.
4. Open and support the hood.
5. From the underside of the rear of the hood panel near the center, reconnect the washer supply hose to the barbed nipple of the front washer nozzle.
6. Close and latch the hood.