Sound Bar

Sound Bar Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable
2. If the vehicle is equipped with the optional hard top, remove the hard top from the vehicle.
3. If the vehicle is equipped with the standard soft top, lower the soft top. Refer to Folding Down the Fabric Top in the Owner's Manual for the procedures.
4. Release the hook and loop closure on each outboard end flap of the sound bar trim cover.

Fig.10 Sound Bar Wire Harness Connector Remove/Install:

5. Lift the left outboard end flap of the sound bar trim cover over the top of the sport bar far enough to access the wire harness connector.
6. Unplug the sound bar wire harness connector.

Fig.11 Sound Bar Remove/Install:

7. Lift each outboard end flap of the sound bar cover over the top of the sport bar far enough to access the mounting screws.
8. Remove the two screws that secure each end of the sound bar to the sport bar.
9. Lift the sound bar up off of the sport bar to remove it from the vehicle.

INSTALLATION
1. Position the sound bar onto the sport bar.
2. Install the two screws retaining the sound bar to the sport bar.
3. Connect the sound bar wire harness connector.
4. Position the sound bar trim cover and attach the hook and loop.
5. If the vehicle is equipped with the standard soft top, raise the soft top.
6. If the vehicle is equipped with the optional hard top, install the hard top.
7. Connect the battery negative cable.