License Plate Bracket: Service and Repair

LICENSE PLATE BRACKET

REMOVAL

1. If installed, remove the license plate.

Fig. 12:

2. Remove the four screws attaching the license plate bracket to the body (Fig. 12).

Fig. 13:

3. On export models remove the bolts and nuts. Fig. 13)
3. Separate the bracket from the body.
5. Disconnect the electrical connectors, if equipped.

INSTALLATION

1. Connect the electrical connectors, if equipped.
2. Position the bracket on the body.
3. Install the four screws attaching the license plate bracket to the body.
4. On export models, install the six bolts and four nuts.
4. If removed, install the license plate.