Pressure Regulating Solenoid: Service and Repair

SOLENOID/PRESSURE SWITCH ASSY

REMOVAL

NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed.

1. Raise vehicle on hoist.
2. Remove valve body assembly from transmission.





3. Remove Solenoid/Pressure Switch Assembly retaining screws from solenoid (Fig. 238).





4. Remove Solenoid/Pressure Switch Assembly and screen from valve body (Fig. 239).

INSTALLATION

NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed.

1. Install Solenoid/Pressure Switch Assembly and screen to the separator and transfer plates.
2. Install and tighten retaining screws to 5.5 Nm (50 in. lbs.) torque.
3. Install valve body.