Control Module: Service and Repair

REMOVAL




1. Locate the transmission control module on the dash panel, under the dash panel silencer pad (2), just to the right of the steering column.
2. Locate the cut lines (1) marked on the silencer pad. Cut the pad along these lines.




3. Remove the transmission control module from the dash panel or bracket.
4. Disconnect the wiring harness connectors (3) from the module.
5. Remove the module from the vehicle.

INSTALLATION




1. Connect the wiring connectors (3) to the transmission control module (1).
2. Install the module to the dash panel (2) or the mounting bracket.
3. Fold the dash panel silencer pad back over the module and retain the pad in place with suitable adhesive tape.