Computers and Control Systems: Tools and Equipment

DRBIII(R) (diagnostic read-out box) scan tool must use the latest release level.
Diagnostic Pinout Box #8815
Evaporative Emissions Leak Detector #8404
Terminal Removal tool #3638
Fuel filler adapter #8382
Fuel pressure adapter (C-6631) or #6539
Fuel pressure kit (C-4799-B) or #5069
Fuel pressure kit #8978
Fuel release hose (C-4799-1)
Jumper wires
Ohmmeter
Oscilloscope
Pressure gauge 0-2068 kPa (0-300 PSI)
Transmission simulator #8833
Electronic Transmission Adapter Kit (Miller # 8333-1A)
Vacuum gauge
Voltmeter
12 volt test light minimum 25 ohms resistance with probe #6801

CAUTION: A 12 volt test light should not be used for the following circuits, damage to the powertrain controller will occur.

- 5-volt Supply
- J1850 PCI Bus
- CCD Bus
- PCI Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal