Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2005 >> Liberty 4WD L4-2.8L DSL Turbo VIN 5 >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Front Control Module (FCM)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Control Module (FCM)

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the charge air inlet hose.

Front Control Module:




3. Remove the front control module mounting fasteners and disconnect the wiring harness connector.

INSTALLATION

Front Control Module:




1. Connect the wiring harness to the FCM (2) and hand tighten fasteners.
2. Tighten FCM fasteners to 10.8 N.m (96 in.lbs.).
3. Install the charge air inlet hose.
4. Connect the negative battery cable.
pro multis · About Operation CHARM