Front Door Window Glass: Service and Repair

GLASS

REMOVAL




1. Using the regulator move the front door glass up or down as required to access the two window regulator glass clamp bolts.
2. Remove the watershield from the inside of the front door. Refer to Front Door Panel.




3. Loosen the bolt (2) in each of the window regulator glass clamps (1) just far enough to release the door glass from the clamps. Do not loosen completely.




4. Disengage the door glass from the window regulator glass clamps by lowering the regulator down as required for access to remove the door glass.
5. Carefully rotate the door glass within the window opening and remove the glass from the door through the window opening.

INSTALLATION




1. Carefully lower the door glass (2) into the door through the window opening.
2. Rotate the door glass into position and engage it to the window regulator glass clamps making sure the glass and lift plates are properly seated.




3. Using the regulator (4), move the front door glass up or down as required to access to the two window regulator glass clamp bolts (3).
4. Tighten the bolts in each of the window regulator glass clamps to 12 N.m (105 in.lbs).




5. Install the watershield (1) onto the inside of the front door (2).