Console: Service and Repair

CONSOLE-FLOOR

REMOVAL




1. Using a trim stick C-4755 or equivalent, remove the shifter bezel ring.




2. Using a trim stick C-4755 or equivalent, remove the shifter bezel.




3. Remove the center console back cover (2) and disconnect the electrical connector (3).




4. Remove the screws (2) and remove the console (1).

INSTALLATION




1. Position the console (1) into the vehicle and install the screws (2).




2. Connect the electrical connector (3) and install the rear cover (2) onto the console (1).




3. Position the shifter bezel and seat fully.




4. Position the shifter bezel trim ring and seat fully.