Lamp

LIFTGATE LAMP

LAMP

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the trim (1) from the liftgate inner panel.
3. Pull the trim away from the liftgate inner panel far enough to access and disconnect the wire harness connector (3) from the back of the liftgate lamp housing (2).
4. From the back of the trim panel, compress the latch features on the outside of the lamp housing and push the lamp out through the mounting hole toward the face of the panel.
5. Remove the liftgate lamp from the vehicle.

INSTALLATION




1. Align the liftgate lamp (2) to the mounting hole in the face of the liftgate trim panel (1).
2. Using hand pressure, press the lamp firmly and evenly into the mounting hole until the lamp latch features snap into place.
3. Reconnect the wire harness connector (3) to the back of the lamp housing.
4. Reinstall the trim onto the liftgate inner panel.
5. Reconnect the battery negative cable.