Overhaul (Bearings-Differential Case)
BEARINGS-DIFFERENTIAL CASEREMOVAL
CAUTION: Do not disturb the ELSD pump after bearing has been removed. Failure to follow these instructions will damage the pump seals.
1. Install Plug SP3289 (3) Into the differential axle shaft hole.
2. Remove differential case bearings with Puller 6444 (1), Puller Rods 6444-4 (2) and Puller Flange 6444-1(4). Position puller on the differential.
3. Position Puller (1) Jaws 96412. around the case bearing and puller flange.
4. Position Puller (1) Collar 6444-8 (2) around the puller jaws.
5. Tighten the puller nut and remove differential case bearing.
INSTALLATION
CAUTION: Do not disturb the ELSD pump after bearing has been removed. Failure to follow these instructions will damage the pump seals.
1. Install differential case bearing with Installer C-4340 (1) and Handle C-4171 (2).