Instrument Panel Center Bezel

BEZEL-CENTER

REMOVAL




1. Using a trim stick C-4755 or equivalent, separate the radio bezel, if equipped.
2. Using a trim stick C-4755 or equivalent, separate the radio hood bezel.
3. Using a trim stick C-4755 or equivalent, remove the shifter bezel ring.




4. Using a trim stick C-4755 or equivalent, remove the shifter bezel.




5. Remove the screw inside the lower storage bin, if equipped.
6. Using a trim stick C-4755 or equivalent, remove the center bezel and disconnect the electrical connectors.

INSTALLATION




1. Position the center wire harness and connect the electrical connectors.
2. Install the center bezel.
3. Install the screw inside the lower storage bin, if equipped.




4. Position the shifter bezel and seat fully.
5. Position the shifter bezel trim ring and seat fully.




6. Position the radio hood bezel and seat fully.
7. Position the radio face plate and seat fully, if equipped.