Front Suspension

STABILIZER BAR

REMOVAL





1. Raise and support the vehicle.
2. Remove the front splash shield.
3. Remove the stabilizer bar link upper nut (1) & bolt (2).





4. Remove the two stabilizer bushing clamp (2) bolts.
5. Remove the stabilizer bar (1).

INSTALLATION





1. Install the stabilizer bar (1) to the vehicle.
2. Install the stabilizer bushing clamp (2) and tighten the bolts to 129 Nm (95 ft. lbs.).





3. Install the upper stabilizer link (3) and tighten nut (1) & bolt (2) to 108 Nm (80 ft. lbs.).
4. Install the front splash shield.
5. Lower the vehicle.