C1235

C1235 DRIVE TEST: TEST ACTIVE

When Monitored:

With ignition on.

Set Condition:

Conditions for running drive test not met.






1. CHECK FOR A DTC C1235-DRIVE TEST: TEST ACTIVE

NOTE: This DTC must be active for the results of this test to be valid

Turn the ignition on.
With the scan tool, read and record DTC's.
With the scan tool, read and record Freeze Frame information.
Perform ECU initialization with drive test.

NOTE: Drive test must be performed correctly for ECU to initialize

With the scan tool, erase DTC's.
Start the engine.
With the scan tool, read and record DTC's.

Does the scan tool display: C1235-DRIVE TEST: TEST ACTIVE?

Yes

- Go To 2

No

- Refer to the INTERMITTENT CONDITION diagnostic procedure.
- erform ABS VERIFICATION TEST VER 1.

2. DRIVE TEST ACTIVATED BUT NOT RUN

With scan tool rerun drive test.

WAS DRIVE TEST COMPLETED?

Yes

- Replace the Anti-Lock Brake Module.
- Perform ABS VERIFICATION TEST VER 1.

No

- Rerun drive test.