Power

WINDOW REGULATOR - POWER

REMOVAL




1. Remove the waterdam.




2. Raise the glass (4) to the position shown and using a long flat blade or hook type tool, disengage clips (1) attaching glass retainer to regulator lift plate (3).
3. Disconnect the glass (4) from the regulator lift plate and re-install the clips (1).
4. Secure the glass in the up position using a wood wedge, tape or equivalent.




5. Loosen the bolts (1, 2 and 4).
6. Disconnect the runout tube clip (3).
7. Disconnect the electrical connector and remove the regulator (5).

INSTALLATION




1. Install the regulator assembly (5).
2. Connect the electrical connector.
3. Connect the runout tube clip (3).




4. Tighten the bolts to 9 N.m (80 in. lbs.) using the sequence shown.




5. Remove the glass support and connect to the regulator lift plate (3).




6. Install the waterdam.