Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Grand Cherokee 4WD V6-3.7L VIN K >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal






REMOVAL










The speed control servo assembly (3) is attached to a cross-support (4) located in the engine compartment.

1. Disconnect negative battery cable at battery.

2. Disconnect vacuum line at servo.

3. Disconnect electrical connector (5) at servo.

4. Remove servo mounting bolt (7).

5. Disconnect servo cable at throttle body. Refer to Servo Cable Removal/Installation.




6. Remove 2 mounting nuts (1) holding servo cable sleeve (4) to bracket.

7. Pull speed control cable sleeve and servo away from servo mounting bracket to expose cable retaining clip (3) and remove clip.

NOTE: The servo mounting bracket displayed is a typical bracket and may/may not be applicable to this model vehicle.

8. Remove servo (2) from mounting bracket. While removing, note orientation of servo to bracket.
pro multis · About Operation CHARM