Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Grand Cherokee 4WD V6-3.7L VIN K >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Installation






3.7L




1. Clean out machined hole in cylinder head.

2. Apply a small amount of engine oil to sensor O-ring.

3. Install sensor (3) into cylinder head (1) with a slight rocking and twisting action.

CAUTION: Before tightening sensor mounting bolt, be sure sensor is completely flush to cylinder head. If sensor is not flush, damage to sensor mounting tang may result.

4. Install mounting bolt (2) and tighten to 12 Nm (106 in. lbs.).

5. Connect electrical connector to sensor.
pro multis · About Operation CHARM