Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2007 >> Grand Cherokee SRT-8 V8-6.1L VIN 3 >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Install ignition key into lock cylinder (1). Rotate key to "ON" position (retaining tab on side of lock cylinder (3) can now be depressed).

2. The shaft at end of key lock cylinder aligns with socket within end of housing. To align socket with lock cylinder, ensure socket is in "ON" position.

3. Position and align key lock cylinder with grooves in housing.




4. Slide lock cylinder into housing until release tab (3) sticks through opening at side of housing.




5. Install ignition switch (2) to switch housing (1) until it snaps into the two tabs. Install and tighten screw (4).




6. Install SKREEM unit (2) to switch housing (3) and install screw (1).




7. Position cable into assembly until tab (1) engages.




8. Install one key cylinder housing torx screw (1). Do not tighten (finger tight only).




9. Install two key cylinder housing torx screws (2). Now tighten all three housing mounting screws.

10. Install knee blocker.

11. Install silencer pad.

12. Install both bezel. Snaps on.

13. Connect negative battery cable.
pro multis · About Operation CHARM