Installation

INSTALLATION






NOTE: Make sure that the foam insulator is properly positioned in the HVAC housing.

1. Carefully install the heater core (1) into the top of the HVAC housing (4).

2. Engage the four retaining tabs (3 and 6) that secure the heater core to the HVAC housing.

3. If equipped, install the two screws (2 and 5) that secure the heater core to the HVAC housing. Tighten the screws to 2 Nm (17 in. lbs.).

NOTE: If the heater core is being replaced, flush the cooling system.

4. Install the HVAC housing.