Removal

REMOVAL






NOTE: LHD model shown. RHD model similar.

1. Remove the HVAC housing and place it on a workbench.

NOTE: If the rubber flange around the heater core tubes is deformed or damaged, the flange must be replaced.

2. If equipped, remove the two screws (2 and 5) that secure the heater core (1) into the top of the HVAC housing (4).

NOTE: If the foam insulator around the heater core is deformed or damaged, the insulator must be replaced.

3. Disengage the four retaining tabs (3 and 6) that secure the heater core to the HVAC housing and carefully remove the heater core from the housing.