U0415

U0415-IMPLAUSIBLE DATA RECEIVED FROM ABS

For a complete wiring diagram refer to Diagrams/Electrical Electrical Diagrams


- When Monitored:

With the ignition on for 4 seconds, no CAN BUS circuit error condition present, no lost communication with ABS condition present, and no system undervoltage or overvoltage condition present.

- Set Condition:

The Automatic Sway-Bar System Module is receiving implausible data for vehicle speed, wheel speed.







Diagnostic Test


1. ABS DTCS PRESENT

Ignition on, engine not running.

With the scan tool, read DTCs in the Antilock Brake Controller.

Are there any DTCs present?

Yes

- Refer to the symptom list and perform the applicable diagnostic procedure.
- Perform ASBS VERIFICATION TEST. ASBS Verification Test

No

- Replace the ASBS Module in accordance with the Service Information.
- Perform ASBS VERIFICATION TEST. ASBS Verification Test