Restraints - Clockspring Replacement/Warranty Extension
NUMBER: 08-067-11GROUP: Electrical
DATE: December 21, 2011
SUBJECT:
Clockspring Replacement Due To Airbag Warning Lamp Illumination X41 (10 Year Or 150,000 Mile (240,000 Kilometers) Warranty Extension)
OVERVIEW:
This bulletin involves replacing the Airbag Clockspring if the Airbag Warning Lamp Is Illuminated.
MODELS:
2007 (JK) Wrangler
NOTE:
This bulletin applies to Left Hand Drive models only.
SYMPTOM/CONDITION:
Some customers may experience the illumination of the Airbag Warning Lamp. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set.
^ B1B00 - Driver Airbag Squib 1 Circuit Low
^ B1B01 - Driver Airbag Squib 1 Circuit High
^ B1B02 - Driver Airbag Squib 1 Circuit Open
^ B1B03 - Driver Airbag Squib 1 Circuit Shorted Together
^ B1B04 - Driver Airbag Squib 2 Circuit Low
^ B1B05 - Driver Airbag Squib 2 Circuit High
^ B1B06 - Driver Airbag Squib 2 Circuit Open
^ B1B07 - Driver Airbag Squib 2 Circuit Shorted Together
DIAGNOSIS:
Using a Scan Tool (wiTECH) determine if any of the above DTCs are present. If the appropriate diagnostics available in DealerCONNECT/TechCONNECT determines that the clockspring is the cause, perform REPAIR PROCEDURE.
NOTE:
This Service Bulletin only applies to the replacement of the clockspring. All other repairs are not covered by this Service Bulletin
PARTS REQUIRED:
REPAIR PROCEDURE:
1. Replace the clockspring. Follow the detailed procedures available in DealerCONNECT > TechCONNECT > 10 - Restraints > Clockspring, removal and installation procedures.
POLICY:
Reimbursable within the provisions of the warranty.
NOTE:
Vehicles included in this Service Bulletin have a 10 Year or 150,000 Mile (240,000 Kilometers) Warranty Extension for this repair. See Warranty Bulletins; U.S. D-11-63, Canada SAB-2011-37, Mexico BG-023-11 or International ID-11-15 for details associated with the extended warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.