Installation

INSTALLATION





CAUTION: To prevent severe damage to the Crankshaft, Damper or Damper Installer 8512A, thoroughly clean the damper bore and the crankshaft nose before installing Damper.

1. Using the Seal Installer 8348 (2) and Damper Installer 8512A (3), install the crankshaft front seal.
2. Install the vibration damper. Vibration Damper - Installation
3. Install the radiator cooling fan and shroud. Radiator Fan - Installation
4. Install the upper radiator hose.
5. Install A/C compressor and tighten fasteners to 54 Nm (40 ft. lbs.). A/C Compressor - Installation
6. Install the accessory drive belt Accessory Drive Belt - Installation
7. Refill the cooling system. Service and Repair
8. Connect the negative battery cable to battery.