Rear Distribution

INSTALLATION





NOTE: Make sure that the foam seal on the air outlet is not damaged.

1. Align the upper rear air outlets (1) with the openings of the rear upper air duct and install the air outlets into the upper rear air outlet bezel (2) as necessary. Make sure that each of the air outlet's three retaining clips (3) are fully engaged to the bezel.




NOTE: Make sure that the air outlets are properly aligned to the rear upper air duct opening.

2. Position the upper rear air outlet bezel (1) to the quarter interior trim panel (3) and engage the lower bezel retainer clips to the trim panel.
3. Roll the top of the upper rear air outlet bezel upward and gently push the top of the bezel into the quarter interior trim panel until the upper bezel retainer clips (2) fully engage the slots in the trim panel.